○ Truck dashcam ○ FullHD + 2x FullHD ○ Cloud optie ○ 512gb support Read more.
This Gnet GT900 3CH is a super advanced truck dashcam with large touch screen LCD screen and high-quality components. The waterproof cameras on the sides and rear (optional) capture everything around the truck in razor-sharp detail. The GT900 is also equipped with an external GPS receiver that tracks speed and location. It is also possible to track the GT900 live via WithCloud.
The Gnet GT900 3CH is equipped with one FullHD camera at the front and two HD (720p) cameras for the sides so that everything around the truck is recorded. All the cameras film in 30fps and are equipped with the high-quality Sony Starvis Night Vision sensor so the images are very clear both during the day and at night.
The three separate cameras are fully IP69K waterproof and can therefore be mounted anywhere, such as at the doge corner and behind the truck. IP69K is the most durable rating and can withstand the most extreme weather conditions. Optionally, a 19m-long FullHD camera for the back of a truck body or semi-trailer is available to allow recording behind the truck as well.
Specifications:
Cam 1 FullHD 150˚: In dashcam (front)
Cam 2 HD 130˚: 5m (left)
Cam 3 HD 130˚: 5m (right)
Cam 4 HD 130˚: 19m (rear, optional)
The Gnet GT900 can be connected to the WithCloud network, making it possible to watch the dashcam remotely. You can connect the Gnet GT900 to the internet via a Wifi hotspot in the car. Via the WithCloud app, you can then watch live from the dashcam and receive notifications of events. This allows you to always keep an eye on your car, wherever you are.
With the optional SIM Wifi adapter (see accessories), you can easily create an in-car Wifi hotspot. You insert a SIM card with mobile data subscription into the SIM adapter and connect it in the car via USB. You then simply connect the Gnet GT900 to the Wifi network via the App so that the dashcam is connected to the internet.
Accessible via the App or PC, the WithCloud system is a comprehensive Fleet management system with the following options:
- Live streaming of images
- Live GPS tracking
- Parking position notifications
- Driver reports (driving time, behaviour etc.)
- Geo-fencing (virtual location Barrier)
The GT900 3CH can be extended with a Wifi dongle so you can view images wirelessly within range of the dashcam. Images can be viewed and downloaded via the freely available app so there is no need to remove the SD card from the camera. By viewing the files via Wifi instead of the Cloud, you won't end up losing data via the SIM card.
In addition to both cameras being equipped with the Sony Starvis Night vision sensor, the separate HD camera is equipped with infrared LEDs, providing excellent night vision. The camera itself senses when it gets dark and then automatically activates the infrared LEDs on the camera.
The Gnet GT900 has a convenient automatic Time Lapse parking mode function to secure the car when parked. In this Time Lapse mode, the camera takes two photos every second and this is later played back as an accelerated video.
Because of the Time Lapse mode, the videos do not take up too much space and can therefore be recorded for a very long time without filling up the SD card. Combined with the supplied Continuous power supply, the parking mode automatically switches on when the car ignition is switched off and normal recording starts again when the car is started.
The Gnet GT900 3CH truck dashcam has a large and bright 4.50-inch IPS Touchscreen LCD screen with high resolution (800*480p). The LCD screen can be used to view recordings and operate the menu. The screen can switch between the individual cameras or display all cameras at once.
The Gnet GT900 3CH comes with an external GPS receiver as standard. By connecting the GPS to the camera, the current speed can be displayed on screen and the coordinates of the places filmed can be viewed back. This makes it possible to track the truck live.
The Gnet GT900 3CH comes with 5V/3A 3-wire continuous power supply for unobtrusive and professional installation. The three-wire connection ensures that parking mode is automatically switched on as soon as the ignition is switched off and should be connected as follows - preferably in the fuse box:
Red: Continuous fuse that always supplies power.
Yellow: Switched fuse that only supplies current when the ignition is switched on.
Black: Earth
The power supply has a built-in protection device that cuts off the current at a voltage of 11.6V/23.2V or lower. This ensures the car battery is not overloaded and the dashcam switches off when the voltage drops too low. The power supply is suitable for 12V and 24V vehicles.
As with any 'standard' dashcam, the Gnet GT900 3CH truck dashcam has loop recording which automatically overwrites the oldest files for new files. That way, the dashcam will always keep filming, even when the SD card is full. Depending on the size of the SD card, this preserves the last hours driven.
As with any 'standard' dashcam, the Gnet GT900 3CH truck dashcam has loop recording which automatically overwrites the oldest files for new files. That way, the dashcam will always keep filming, even when the SD card is full. Depending on the size of the SD card, the last
hours driven are thereby preserved.
With its built-in G-sensor, the Gnet GT900 3CH notices when you have had an accident. Upon impact, images are automatically stored securely so they are not lost. They can no longer be overwritten or deleted via the dashcam. This way, you can be sure that the most important files are always preserved. The sensitivity of the G-sensor can be adjusted in the menu.
The Gnet GT900 3CH has a built-in screensaver. This screensaver automatically turns off the screen - by default after 1 minute - so that the driver is not unduly inconvenienced while driving. The screensaver can also be set to show the Date and Time or switched off.
This Gnet GT900 3CH dashcam has a built-in microphone. The videos therefore feature audio. The microphone can be switched on and off with a single press of the Menu button.
Gnet GT900 3CH comes with sturdy holder with sticker attachment for the LCD screen. This allows the screen to be attached to the windscreen for good visibility.
The dashcam stores images with date and time recording at the bottom of the videos. So later you can see exactly when certain recordings were made.
The Gnet GT900 3CH comes with 128gb Micro SD card, this is good for around 12 hours of recording. The GT900 dashcam supports Micro SD cards up to 512gb.
Because the Gnet GT900 3CH is equipped with a format-free function, the SD card is formatted regularly and automatically so you don't have to look at it again and proper operation of the dashcam is guaranteed.
