○ 4x 720p cameras ○ 10 inch TFT screen ○ Loop recording ○ Remote controller Read more.
The Motocam X10 4CH is the perfect combination truck camera system and dashcam with four 720p dashcams. The three front cameras can be placed around the cab and the rear camera with 15-foot cable can be mounted on the back of the trailer or truck. The remote control makes it easy to switch between the four cameras.
This Motocam X10 4CH is a nice dashcam that can be used as a truck camera system at the same time. On the large 10-inch TFT screen all cameras can be shown simultaneously or separately. The Motocam X10 4CH is therefore the ideal assistant while driving and makes it a lot more comfortable for the driver.
The Motocam X10 4CH is equipped with four 720p cameras so that everything around the truck are recorded. The resolution of the cameras is sufficient to see and assess situations around the truck.
Cam 1 720p 110˚: 2m (front)
Cam 2 720p 110˚: 6m (left)
Cam 3 720p 110˚: 6m (right)
Cam 4 720p 110˚: 15m (rear)
The images from all cameras are stored separately on the Micro SD card, regardless of which camera is displayed on the LCD screen.
The Motocam X10 comes with convenient remote control to operate the camera without having to reach the monitor.
Like any standard" dashcam, the Motocam X10 4CH truck dashcam has loop recording which automatically overwrites the oldest files for new files. That way the dashcam always keeps on filming, even when the SD card is full. Depending on the size of the SD card, the last driven hours are thereby saved.
The Motocam X10 4CH truck dashcam starts filming automatically when the car is started and it stops automatically when it is turned off. So you don't actually have to look at it after mounting it. Precondition for the automatic start and stop is that the cigarette power supply only provides power when the ignition is turned on, this is because the dashcam notices when the ignition is turned on and off.
Because of the built-in G-sensor, the Motocam X10 4CH notices when you've been in an accident. Upon impact, images are automatically stored securely so they are not lost. They can no longer be overwritten or deleted via the dashcam. This way you can be sure that the most important files will always be preserved. The sensitivity of the G-sensor can be adjusted in the menu.
The Motocam X10 4CH has a built-in screensaver. This screensaver automatically turns off the screen - by default after 1 minute - so that the driver is not unduly inconvenienced while driving. The screen can be reactivated with a single press of the Bluetooth or OK button. The screen saver can also be turned off in the menu, the screen then always remains on.
This Motocam X10 4CH dashcam has a built-in microphone. The videos are therefore provided with audio. The microphone can be turned on and off with one press of the Menu button.
Motocam X10 4CH comes with convenient adhesive mount for the LCD screen. This allows the screen to be securely mounted on the dashboard so that it is clearly visible to the driver.
The Motocam X10 4CH comes with 4-meter 5V/3A cigarette power supply to power the dashcam. The power supply is suitable for 12V and 24V vehicles. Using another power supply is not possible (without cutting) due to the special connectors used to connect the power supply to the dashcam.
The dashcam stores images with date and time stamping at the bottom of the videos. So later you can see exactly when certain recordings were made.
Viewing the recorded images from the Motocam X10 4CH can be done via PC or on the dashcam itself. The dashcam comes with USB cable that allows the dashcam to be connected to the PC. The video files are saved as normal MP4 files on the SD card, these can be viewed with any video player on the PC.
The Motocam X10 4CH supports Micro SD cards up to 128gb. This is good for a total of about 24 hours of 720p recording.
